Kodak 2400DSV User Manual

Disassembly and Cleaning

59

1. Before disassembling, always make sure the Power Plug is 

unplugged.

2. Use only fuses of the indicated rating.

3. Except specified occasion, re-assembly have to be carried out by 

reversing the disassembly procedure.

4. If it is necessary to plug in the Power Cord and operate  the machine 

after disassembling it, please be careful of the following:

- Keep your hands, clothing, etc. well away from operating or 

rotating parts (such as belts, rollers, fan motors, etc.).

- Never touch the terminals of electrical parts or high-voltage parts 

(such as chargers and the high-voltage unit).

5. When the machine is stopped, the Projection Lamp is hot, so handle it 

very carefully.

6. To prevent damage to ICs from static electricity, do not touch the ICs 

on the PWB or the terminals of peripheral electricity parts with your 
hands.

7. Always unplug connectors by holding the connector housing.  Pulling 

on the connectors on the PWBs themselves, always make sure the 
Power Cord is unplugged first.

8. Do not disassemble the Right and Left Frame Covers and the fixing 

screws to which red paint has been applied.

Right Frame Cover

Left Frame Cover