Kodak 2400DSV User Manual
Disassembly and Cleaning
5
65
5.4.2 Replacing of the Projection Lamp
1
Slide the Projection Lamp Unit out.
2
Remove the Projection Lamp from
the Lamp Holder.
the Lamp Holder.
NOTE
➜
Do not touch with bare hand and extremely hot Projection Lamp
immediately after the machine has been turned OFF.
immediately after the machine has been turned OFF.
3
Remove the Projection Lamp from
the Lamp Socket.
the Lamp Socket.
4
Insert a new Projection Lamp so
that the mark on its base is facing
upwards. Make sure that the new
Projection Lamp is inserted
securely so that there is no gap
between the projection Lamp and
the Lamp Socket.
that the mark on its base is facing
upwards. Make sure that the new
Projection Lamp is inserted
securely so that there is no gap
between the projection Lamp and
the Lamp Socket.
NOTE:
➜
Do not touch the reflector mirror surface of the Projection Lamp.
➜
Fingerprints, smudges or debris should be wiped clean with a soft, dry
cloth.
cloth.
Mark