Epson StylusPro10000 User Manual
5-10
5-10
|
Monitoring and Configuring the Printer
2. Press the Item button repeatedly until INTERFACE=AUTO* appears on
the display. This is the default setting.
•
Press the + button once to select the parallel interface.
INTERFACE=PARALLEL
INTERFACE=PARALLEL
appears on the display.
•
Press the + button again to select the USB interface.
INTERFACE=USB
INTERFACE=USB
appears on the display.
•
Press the + button again to select the FireWire interface.
INTERFACE=OPTION1
INTERFACE=OPTION1
appears on the display.
•
Press the + button again if you have installed the optional Ethernet
Type B interface card for network connectivity.
INTERFACE=OPTION2
Type B interface card for network connectivity.
INTERFACE=OPTION2
appears on the display.
You can use the + or – button to cycle through all four settings.
3. When you have selected the setting you want, press the Enter button to
save it. Then press the SelecType button to exit the Printer Setting
menu.
menu.
Configuring the Parallel Interface
You can use the control panel to change the parallel interface to ECP mode
for faster printing. To use this mode, you must connect a computer directly
to the printer’s parallel interface (without a RIP), and the computer must
support ECP mode. See your computer’s documentation for details.
for faster printing. To use this mode, you must connect a computer directly
to the printer’s parallel interface (without a RIP), and the computer must
support ECP mode. See your computer’s documentation for details.
Follow these steps to configure the parallel interface:
1. Press and hold the Pause button while you press the Power button to
turn on the printer. HEX DUMP = PRINT appears on the display.
2. Press the Item button repeatedly until PARA. I/F=COMPAT* appears
on the display. The asterisk (*) indicates that compatible mode (the
default) is selected.
default) is selected.
3. Press the + button. PARA. I/F=ECP appears on the display. This sets the
parallel interface to ECP mode.
4. Press the Enter button to save your setting. Then press the Power
button to turn the printer off and exit maintenance mode.
Note
If you experience any
problems using ECP
mode, switch back to
compatible mode. Only
a parallel connection
can be configured to
use ECP mode.
problems using ECP
mode, switch back to
compatible mode. Only
a parallel connection
can be configured to
use ECP mode.