Epson StylusPro10000 User Manual

If you notice that your paper isn’t cut cleanly, the cutter blade may need to 
be replaced. If you use the blade to cut heavy stock or non-EPSON media, 
you may need to replace it more often. You can also check the status of your 
cutter by printing the status check sheet or using the Printer Status menu on 
the control panel. See page 5-3 or 5-4 for instructions.

You can obtain a new cutter blade (part number C815131) from 
EPSON at (800) 873-7766, or visit the EPSON Pro Graphics web site at 
http://prographics.epson.com.

To replace the cutter blade, you first need to remove the used blade, as 
described in the following section.

Make sure the printer is on, then follow these steps to remove the blade:

1. Press the SelecType button repeatedly until CUTTER REPLACE 

MENU

 appears on the display.

2. Press the Item button. CUT. REPLACE=EXEC. appears on the display. 

3. Press the Enter button. The paper cutter holder moves to the 

replacement position.

Be careful not to cut 
yourself while replacing 
the paper cutter blade.

To avoid damaging 
your printer, never 
move the paper cutter 
holder by hand.