Epson StylusPro10000 User Manual

Page of 168
8
8
|
Introduction
Place the printer near a wall outlet where the plugs can be easily 
unplugged.
Placez l’imprimante près d’une prise de contacte où la fiche peut être 
débranchée facilement.
Do not let the power cords become damaged or frayed.
If you use an extension cord with the printer, make sure the total ampere 
rating of the devices plugged into the extension cord does not exceed the 
cord’s ampere rating. Also, make sure the total ampere rating of all 
devices plugged into the wall outlet does not exceed the wall outlet’s 
ampere rating.
Except as specifically explained in the documentation, do not attempt to 
service the printer yourself. Opening or removing those covers that are 
marked “Do Not Remove” may expose you to dangerous voltage points 
or other risks. Refer all servicing in those compartments to service 
personnel.
Power down the printer from the control panel, unplug the printer and 
refer servicing to qualified service personnel under the following 
conditions: 
If the power cord or plug is damaged; if liquid has entered the printer; if 
the equipment has been dropped or the case damaged; if the printer does 
not operate normally or exhibits a distinct change in performance. 
Adjust only those controls that are covered by the operating instructions.
Ink Cartridge Safety Instructions
Do not put your hand inside the printer or touch the cartridges during 
printing.
To avoid damaging the printer, do not move the print head by hand.
Under normal circumstances, ink will not come out of the cartridge. If it 
does get on your skin, wash it off with soap and water. If it gets in your 
eyes, flush them immediately with water.
Keep ink cartridges out of the reach of children and do not drink the 
ink.
Do not store ink cartridges at high or freezing temperatures. Keep 
cartridges away from direct sunlight.