Epson StylusPro10000 User Manual
2-9
Handling Paper and Other Media
|
2-9
Cutting Paper Manually with the Built-in Cutter
When you’re not using the Auto Cut setting, you need to cut the paper
manually after your print job is finished. If you’re printing on canvas, vinyl,
or other heavy media, you should use scissors or the optional utility cutter
rather than the built-in cutter. Heavy media can damage the built-in cutter.
manually after your print job is finished. If you’re printing on canvas, vinyl,
or other heavy media, you should use scissors or the optional utility cutter
rather than the built-in cutter. Heavy media can damage the built-in cutter.
Follow these steps to cut manually with the built-in cutter:
1. If the paper is not positioned correctly, press one of the Paper Feed
buttons to adjust the paper position. Normally, you don’t need to do
this after a print job is finished.
this after a print job is finished.
2. Press the Paper Source button until the Roll Auto Cut light comes on.
3. Press the Cut/Eject button. The paper is cut.
Printing Trim Lines
You can have trim lines printed on the right edge of your images or pages (if
you’re using Auto Cut) or on the right and bottom edge (if you’re not using
Auto Cut). Follow these steps:
you’re using Auto Cut) or on the right and bottom edge (if you’re not using
Auto Cut). Follow these steps:
1. Press the SelecType button. PRINTER SETTING MENU appears on
the display.
2. Press the Item button until PAGE LINE=OFF appears on the display.
3. Press the + button. PAGE LINE=ON appears on the display.
4. Press the Enter button to save the new setting.
5. Press the SelecType button to exit the Printer Setting menu.
If you’re using the EPSON printer driver, you can also specify trim lines
through your print options. See page 3-3 (Macintosh) or page 4-7
(Windows) for more information.
through your print options. See page 3-3 (Macintosh) or page 4-7
(Windows) for more information.
Note
For information on how
to attach and use the
optional utility cutter, see
the documentation that
came with the cutter.
to attach and use the
optional utility cutter, see
the documentation that
came with the cutter.