Epson Photo 925 User Manual
45
Eng
li
s
h
Fit to Frame
This setting is to automatically trim off the image that extend
beyond the margins of the selected print size, so that the printed
result matches the specified print size. Either the top and bottom
areas or the left and right areas of the image will be trimmed,
depending on the aspect ratio of the original photo and the
selected print size. By default, this setting is On.
beyond the margins of the selected print size, so that the printed
result matches the specified print size. Either the top and bottom
areas or the left and right areas of the image will be trimmed,
depending on the aspect ratio of the original photo and the
selected print size. By default, this setting is On.
Resize each photo (without trimming it) so that it fits inside the
print area specified in the Select a Print Layout dialog box.
Margins may appear at the left and right of the photo, depending
on the print size and aspect ratio.
print area specified in the Select a Print Layout dialog box.
Margins may appear at the left and right of the photo, depending
on the print size and aspect ratio.
Bidirectional Printing
This setting activates bidirectional printing so your printer prints
both left-to-right and right-to-left. Bidirectional printing speeds
up printing, but decreases print quality. By default, this setting is
On.
both left-to-right and right-to-left. Bidirectional printing speeds
up printing, but decreases print quality. By default, this setting is
On.
Note:
If misaligned vertical lines appear during bidirectional printing, you
may need to align the print head. To align the print head, see “Aligning
the Print Head” on page 81.
If misaligned vertical lines appear during bidirectional printing, you
may need to align the print head. To align the print head, see “Aligning
the Print Head” on page 81.
On
Trims off the image.
Off
Does not trim off the image