Nikon 5000ED User Manual

If fi lm jams in the SA-21, the scanner status LED will fl icker on and off about fi ve times a 
second.  Normally, the fi lm will be ejected automatically.  If the scanner fails to eject the fi lm, 
follow the instructions below.

1 

Release the adapter lock mechanism
If the computer displays an error message, click OK to release the adapter lock mecha-
nism.

2 

Remove the SA-21
Exercise caution to avoid damaging any 
fi lm that may be protruding from the 
rear of the adapter.

3 

Place the SA-21 on a level, stable surface
To prevent damage to the adapter, work with the SA-21 on a level, stable surface.

4 

Open the front panel
Press the release button and open the 
front panel.

Attempting to remove the SA-21 without releasing the lock mechanism could interfere with the connec-
tion between the adapter and the scanner.  If an attempt has been made to remove the SA-21 without 
releasing the lock mechanism, push the adapter back into the scanner to re-establish the connection.  
Attempting to remove the adapter by force could damage the adapter or scanner.

Dust is a common cause of fi lm feed errors.  To prevent jams, use a blower to remove dust and lint from 
fi lm before scanning.

If an error is displayed after the fi lm is ejected, it may be necessary to clean the SA-21 as described under 
“Caring for the SA-21” (

 54).

For information on removing jammed fi lm from optional adapters, see the documentation provided with 
the adapter.

Release button

Front 

panel