Epson 4880 User Guide
Maintenance and Transportation
173
Changing the Black Ink Cartridge
You can change the black ink according to your purpose. You can choose
either Matte Black or Photo Black.
either Matte Black or Photo Black.
c
Caution:
To avoid interrupting a black ink change, observe the following conditions:
To avoid interrupting a black ink change, observe the following conditions:
❏ Do not turn off the printer.
❏ Do not open the top cover.
❏ Do not remove the rear cover.
❏ Do not move the paper lever to the released position.
❏ Do not remove the ink cartridges.
❏ Do not remove the maintenance tank.
❏ Do not unplug the power cord.
Note:
❏ If an electrical power failure occurs during this operation, turn the printer on again.
❏ If an electrical power failure occurs during this operation, turn the printer on again.
You can continue your procedure at the breakpoint.
❏ The Black Ink Conversion Kit is required when changing the black ink. Also, the
black ink cartridge that you want to change to (either Matte or Photo) is required.
To check the product code, see "Options and Consumable Products" on page
241.
To check the product code, see "Options and Consumable Products" on page
241.
❏ If MNT TK NEAR FULL or MNT TNK FULL appears on the LCD, you need to replace
the maintenance tank. See "Replacing the Maintenance Tank" on page 178.
❏ The black ink installed in your printer before the change cannot be expended.
To change the black ink, follow the steps below.
1. Make sure that READY appears on the LCD.
2. Press
Menu to enter the printer’s menu system.
3. Press
or
to select MAINTENANCE, then press
Menu.
4. Press
or
to select BK INK CHANGE, then press
Menu.
5. Press
Menu again.