Epson 4880 User Guide

When the 

pause light does not come on and mechanism initialization does 

not start even when the P power button is pressed to turn on the printer, try 
the following:

❏ Turn off the printer and make sure the power cord is securely plugged into 

the printer.

❏ Make sure your outlet works and is not controlled by a wall switch or timer.

❏ Make sure the supplied voltage to the printer matches the rating voltage 

labeled on the printer. If not, turn off the printer and unplug the power cord 
immediately. Contact your dealer for assistance. See "Where To Get Help" 
on page 229.

c

Try one or more of these solutions:

❏ Turn off the printer and computer. Make sure the printer’s interface cable 

is securely plugged into the correct port of the computer.

❏ Make sure the interface cable specifications match the specifications for 

the printer and computer.

SET PAPER LEVER

Paper lever is in the 
released position.

Move the paper lever to 
the secured position.

REAR COVER OPEN

The rear cover is open.

Close the rear cover.

UPDATE FAILED

The printer failed to 
update the firmware.

Update the firmware 
again.