Panasonic KX-PX20M User Manual

Page of 112
Preparation
19
Important
• Do not load more than 18 sheets of paper (or 20 sheets of wide size paper) in the paper 
cassette.
• Be sure to remove printed paper before 10 or more sheets have piled up.
• Do not touch the print surface (the plain, glossy side) or allow it to get dirty. Clear prints may 
become impossible if the print surface gets dirty, stained by fingerprints, or wet with water.
• Do not bend or fold the paper or load it in the cassette with the reverse side facing upward.
• Do not stretch the paper. This may lead to paper jam or prevent printing capability.
• Do not remove the perforated section before printing.
• Do not affix stamps or adhesive seals to the paper before printing.
• Do not print on the paper with a word processor before printing with this printer.
• Do not write on the paper before printing with this printer.
• Do not remove unused sheets of paper from the paper cassette. Close the cassette lid, then 
insert the paper cassette into a plastic bag and store so that it lies flat.
  Insert the paper cassette to the printer.
1
Slide the paper cassette lid 
forward until it catches in 
place.
Pull the paper 
stop upwards.
Click
Slide the lid to align “ ” 
and “ ” marks.
• If you do not slide the 
lid far enough, it will not 
attach properly to the 
printer.
2
Pull the paper stop 
upwards.
3
Open the paper cassette 
compartment cover and 
insert the paper cassette 
firmly while holding the 
unit.
• Make sure that the positions of 
the “ ” and “ ” do not shift when 
attaching the paper cassette.
• If the positions of the “ ” and “ ” 
are misaligned, paper may not feed 
correctly.
Firmly insert 
as far as 
possible.
Paper cassette 
compartment cover
KX-PX20M.indb   19
KX-PX20M.indb   19
2006/12/22   14:04:07
2006/12/22   14:04:07