Kodak 305 User Manual

•  Fingerprints or dust on the paper printing surface may produce poor print quality and cause paper jams. 

•  When the print paper or ribbon is abruptly transferred from a cool place to a hot place, vapor or dew is generated on the 

surface, which causes paper jams or degraded print quality. Leave the print paper in the room to stabilize its temperature 

before use.

•  If you repeat the PRINT PAPER INSTALLATION procedure more than the designated number of times, the indicated 

number of prints may not be made. In addition, if you replace the print paper before it is used up, the indicated number of 

prints may not be made.

•  If the paper absorbs nonvolatile organic solvents (alcohol, ester, ketone, etc.) the print may be discolored.

•  Discoloration of prints is accelerated if the print paper comes into contact with soft vinyl chloride such as transparent 

tape.

•  Avoid storing prints in direct sunlight or places with high humidity.

•  Do not store the print paper and ribbon in the container made of soft polyvinyl chloride. They may be discolored because 

of chemical reaction.

•  Store the print paper and ribbon out of direct sunlight and away from heating appliances in a cool, dark place where the 

temperature is 5˚C to 30˚C and the humidity is 20% to 60% RH.