Kodak 305 User Manual
2
In the interest of safety, please observe the following precautions:
POWER REQUIREMENT
The Kodak 305 Photo Printer is designed to operate on 120 V AC 50/60 Hz in the U.S.A. and Canada, and 220 V - 240 V AC
50/60 Hz in Europe. Never connect to any outlet or power supply having a different voltage or frequency.
WARNING : THIS APPARATUS MUST BE EARTHED.
PROTECTIVE MEASURES
IF ABNORMALITIES ARISE, .....
Use of the printer during emission of smoke or abnormal sounds (without adopting countermeasures) is dangerous. In such a
case, unplug the power cord from the source outlet immediately, and request maintenance service from the sales dealer.
NEVER INSERT ANY OBJECT INTO THE PRINTER
Foreign objects of any kind inserted into this printer constitute a safety hazard and can cause extensive damage.
DO NOT PLACE ANYTHING ON THE KODAK 305 PHOTO PRINTER
Heavy objects placed on the Kodak 305 Photo Printer can cause damage or obstruct proper ventilation.
PROTECT THE POWER CORD
Damage to the power cord may cause fire or shock hazard. When unplugging, hold by the plug only and remove carefully.
DO NOT PLACE WATER CONTAINERS ON THE PRINTER
Do not place flower vases, and other water-holding containers on the printer. If, for some reason, water seeps to the inside of
the printer, unplug the power cord from the source outlet, and contact the sales dealer. If used without corrective measures, the
printer may be damaged.
“In the interest of safety, avoid handling of liquids near the printer.”
DO NOT REMOVE THE CABINET
Touching internal parts is dangerous, besides, it may lead to malfunction. Contact the sales dealer to carry out internal checks
and adjustments. Before opening the cover for eliminating a jammed paper, etc., be sure to disconnect the power cord plug.
UNPLUG THE POWER CORD DURING A LONG ABSENCE
Turn off the main power switch and unplug the power cord during a long absence.
WHEN TRANSPORTING THE PRINTER
When transporting the printer, remove the ribbon and print paper from the printer.
WHEN MOVING THE PRINTER
Check that the printing unit is closed firmly. And pay attention not to press the OPEN button accidentally. When the printing unit
is not closed firmly or you press the OPEN button accidentally, the printing unit may open. It can cause injury or damage.
BE CAREFUL AROUND PRINT PAPER EXIT SLOT
Don’t insert your hand or any material into the paper exit slot during printing.
Do not touch the cutter blade inside the paper exit slot.
Otherwise, your finger will be injured.
DO NOT TOUCH THE THERMAL HEAD EXCEPT WHEN CLEANING
Do not touch the thermal head (located inside the printer) except when cleaning.
They are heated to high temperature and may cause burns or injury when touched.
Also, malfunction caused by static electricity may occur.
WHEN PLACING THE PRINT PAPER, KEEP THE PRINT PAPER UPRIGHT
When you put the print paper sideways on a table, etc., it may roll and fall. This may cause injury.
REMOVE THE TRIM TRAY WHEN OPENING OR CLOSING THE DOOR
When you open or close the door with the trim tray installed, the tray may be removed and fall. This may cause injury or
damage. Also, the chips generated by margin cut may jam at the paper exit slot.
SAFETY PRECAUTIONS