Sony DPP-FP85 User Manual
D:\Printer\DPPFP85.95 series\IM\3285420121DPPFP85.95IM_GB\3285420121\3285420121DPPFP8595IM_GB\050C03.fm
Master: Left
DPP-FP85/FP95 3-285-420-12 (1)
32
GB
1
From the
CreativePrint menu
(page 19), press g/G/f/F to select
“Layout Print,” then press
ENTER.
The Layout Print templates are displayed.
2
Press g/G/f/F to select the desired
template, then press ENTER.
template, then press ENTER.
The preview of the selected template is
displayed
displayed
3
Select an image.
When you select a template with multiple
images, select an image for each area. For
how to select an image, see step 4 on
page 26. When you select image(s), the
window for adjusting the image is
displayed.
images, select an image for each area. For
how to select an image, see step 4 on
page 26. When you select image(s), the
window for adjusting the image is
displayed.
4
Adjust an image.
For how to adjust an image, see step 5 on
page 27. When you adjust an image, the
image is added to the image area.
page 27. When you adjust an image, the
image is added to the image area.
To add a stamp, see “Superimposing a
stamp” on page 31.
stamp” on page 31.
5
Press PRINT.
1
From the
CreativePrint menu
(page 19), press g/G/f/F to select
“ID Photo,” then press ENTER.
“ID Photo,” then press ENTER.
The window used for setting the height
and width of an ID Photo is displayed.
and width of an ID Photo is displayed.
Tip
You can set a maximum size of 7.0 (width) x
9.0 (height) cm.
9.0 (height) cm.
2
Press g/G/f/F to select the item
that you want to adjust, and press
ENTER.
that you want to adjust, and press
ENTER.
• To specify the unit: Select the text box at
the left of the photo frame. You can select
either “cm” or “inch.”
either “cm” or “inch.”
• To specify the height: Select the figure box
at the right of the photo frame.
• To specify the width: Select the figure box
in the upper of the photo frame.
3
Press f/F to set the size or unit and
then press ENTER.
then press ENTER.
4
If you want to specify the other size,
repeat steps 2 and 3.
repeat steps 2 and 3.
5
Press g/G/f/F to select
and
press ENTER.
The window for selecting an image is
displayed.
displayed.
Making layout prints
Making an ID photo