Lexmark 1500 Series User Manual
3
Follow the instructions on the computer screen.
Changing wireless settings after installation (Windows users only)
To change your password, network name, or other wireless setting:
1
Click Programs or All Programs
Lexmark 1500 Series.
2
Click Wireless Setup Utility.
Note: You may be prompted to connect the printer to the computer again using the installation cable as part of
the setup process.
the setup process.
3
Follow the prompts on the computer screen to reinstall the software, and make the changes you want.
Check printer ports (Windows users only)
Make sure the correct printer port is selected.
1
Click Start
Control Panel Printers.
2
Right-click Lexmark XXXX, where XXXX is the model series number of your printer.
3
Click Properties
Ports.
4
Verify that XXXX_Series_nnnnnn_P1 is selected, where XXXX is the model series number of your printer and
nnnnnn is the last six numbers of the MAC address of your printer.
nnnnnn is the last six numbers of the MAC address of your printer.
Note: The MAC address is located at the back of the printer beside the serial number.
5
If USB is selected instead:
a
Select the port name from step 4.
b
Click Apply.
c
Close the window, and try printing again.
Print troubleshooting
Partial document or photo prints
Make sure the paper size being used matches the document or photo size you selected.
Improving print quality
These are possible solutions. Try one or more of the following:
Check paper
•
Use the appropriate paper for the document. If you are printing photos or other high-quality images, for best
results use Lexmark Photo Paper or Lexmark PerfectFinish Photo Paper. Do not use Lexmark Premium Photo
Paper. Your print cartridges are not compatible with this type of paper.
results use Lexmark Photo Paper or Lexmark PerfectFinish Photo Paper. Do not use Lexmark Premium Photo
Paper. Your print cartridges are not compatible with this type of paper.
•
Use a paper that is a heavier weight or bright white.
81