Kodak 300 User Manual

Page of 46
20
www.kodak.com/go/support
6
Troubleshooting
When you have questions about your photo printer, start here. Additional technical 
information is available in the ReadMe file located on the Kodak EasyShare software 
CD. For updates to Troubleshooting information, visit 
Printing problems
If...
Try the following
Paper does not 
feed
(Paper light may 
glow steady and 
On/Off light may 
blink)
IMPORTANT: 
Use only Kodak color cartridge & paper kits for your photo 
printer. Do not use inkjet paper.
The paper tray may be empty. Load paper (
), re-install the paper 
tray, then press the On/Off button, 
.
Check the paper:
Remove the paper tray (
).
Inspect the paper supply: make sure paper is not damaged in any 
way, or removable tabs have not been detached. Reload with new 
paper if necessary.
Carefully "fan" the paper to keep the sheets from sticking together.
Reload the paper tray. Do not exceed the fill line.
Re-install the paper tray, then press 
 to resume printing.
Clean the paper feed roller (
).
Multiple sheets 
of paper are 
pulled through 
printer
1
Remove the paper tray (
).
2
Remove the paper supply from the paper tray. Carefully "fan" the paper 
to keep the sheets from sticking together.
3
Reload the paper tray. Do not exceed the fill line.
4
Re-install the paper tray then press 
 to resume printing.