Kodak 300 User Manual
32
www.kodak.com/go/support
Appendix
Important safety instructions
Using this product
■
Read and follow these instructions before using Kodak products. Always follow
basic safety procedures.
basic safety procedures.
■
The use of an accessory attachment that is not recommended by Kodak, such as an
AC adapter, may cause fire, electric shock, or injury.
AC adapter, may cause fire, electric shock, or injury.
CAUTION:
Do not disassemble this product; there are no user-serviceable parts
inside. Refer servicing to qualified service personnel. Do not expose
this product to liquid, moisture, or extreme temperatures. Kodak AC
adapters and battery chargers are intended for indoor use only. The
use of controls, adjustments, or procedures other than those specified
herein may result in exposure to shock and/or electrical or mechanical
hazards.
inside. Refer servicing to qualified service personnel. Do not expose
this product to liquid, moisture, or extreme temperatures. Kodak AC
adapters and battery chargers are intended for indoor use only. The
use of controls, adjustments, or procedures other than those specified
herein may result in exposure to shock and/or electrical or mechanical
hazards.
Upgrading your software and firmware
Download the latest versions of the software included on the Kodak EasyShare
software CD and the photo printer firmware (the software that runs on the photo
printer). Visit
software CD and the photo printer firmware (the software that runs on the photo
printer). Visit
Additional care and maintenance
■
Do not allow chemicals, such as suntan lotion, to come into contact with the
painted surface of the photo printer.
painted surface of the photo printer.
■
If the photo printer has been subjected to inclement weather or you suspect water
has gotten inside the photo printer, turn off the photo printer and remove the
paper tray and color cartridge. Allow all components to air-dry for at least 24 hours
before using the photo printer again. If this does not resolve the problem, contact
customer support (see
has gotten inside the photo printer, turn off the photo printer and remove the
paper tray and color cartridge. Allow all components to air-dry for at least 24 hours
before using the photo printer again. If this does not resolve the problem, contact
customer support (see
).