Kodak 300 User Manual
Getting started
www.kodak.com/go/support
3
Handling and storing the color cartridge
■
For best quality prints, store the color cartridge in a location where the
temperature does not exceed 85
temperature does not exceed 85
°
F (30
°
C).
■
To avoid getting fingerprints on the ribbon, handle the color cartridge by the spool
ends.
ends.
■
Keep the color cartridge away from direct sunlight and out of high-temperature
environments (such as a vehicle parked in the sun).
environments (such as a vehicle parked in the sun).
Installing and removing the color cartridge
1 Open the cartridge door on the side of the photo printer.
2 Check to make sure there is no slack in the color
cartridge ribbon.
To remove slack, push in on the cartridge spool,
then rotate the spool clockwise.
then rotate the spool clockwise.
IMPORTANT: Be careful not to rotate the spool more
than necessary. Doing so could reduce the
number of prints you are able to make.
number of prints you are able to make.
3 Slide the color cartridge in, label side up, with the
arrow pointing toward the photo printer. Push the
cartridge until it "clicks" into place.
cartridge until it "clicks" into place.
4 Close the cartridge door.
IMPORTANT: The color cartridge may lock in place if there is a paper error. Do not
attempt to remove the cartridge without first clearing the paper error. Make
sure the Paper light is off before attempting to remove the cartridge (see
Paper light under
sure the Paper light is off before attempting to remove the cartridge (see
Paper light under
).