Motorola MF800 User Manual
8
Getting started
1.5
Replacing the remote
control battery
The supplied remote control comes installed with a
CR2032 lithium battery. When you need to replace the
battery, follow the steps below.
1. Slide the locking tab to the right.
CR2032 lithium battery. When you need to replace the
battery, follow the steps below.
1. Slide the locking tab to the right.
2. Pull out the battery holder.
3. Insert the new battery into the battery holder. The
battery must be placed with the positive pole facing
upwards in the illustrated position.
upwards in the illustrated position.
4. Slide the battery holder into the remote control.
WARNING
• Protect the battery from overheating or excessive
moisture.
• Failure to replace the battery in the correct manner may
result in damage to the battery.
• Use only the approved specified batteries.
• Properly recycle or dispose of used batteries according
• Properly recycle or dispose of used batteries according
to local guidelines and regulations.
• Do not throw batteries into fire. This may result in an
explosion.
• If the battery is completely drained or the remote control
is not in use for a long time, remove the battery to
prevent leakage.
prevent leakage.