Nokia 9310658 User Manual

g the Noki

a Imag

ame

1. If needed, activate the IR port of the device to which you want to send an

image.

2. Direct the IR ports of the Nokia Image Frame and the receiving compatible

device toward each other, and ensure that there are no obstructions between
the devices. The maximum allowed distance is up to 1.5 m and the
transmission angle 15

3. Press

and

to send the image. The

icon blinks while the Nokia Image

Frame attempts to establish a connection to the receiving device. During the
image transfer the

icon stops blinking. When the image is successfully

sent, the Nokia Image Frame displays the

icon.

■ Receiving images with the Nokia Image Frame

When the power is switched on, the Nokia Image Frame can receive images. Note
that the Nokia Image Frame converts the received images to display them. For
more information, see

Image format

on page

The image receiving procedure differs depending on the sending device. If the
sending device can send images over IR, you can send the selected images from
the device while the Nokia Image Frame is in the passive IR reception mode. If
image sending cannot be activated from the sending device, the Nokia Image
Frame can pull all the images from the sending device’s default image folder using
the active IR reception mode.