Sony UP-DR80 User Manual

Page of 24
2
Owner’s Record
The model and serial numbers are located at the rear. 
Record these numbers in the space provided below.
Refer to these numbers whenever you call upon your Sony 
dealer regarding this product.
Model No. ____________________
Serial No. ____________________
To reduce the risk of fire or electric shock, do not 
expose this apparatus to rain or moisture.
To avoid electrical shock, do not open the 
cabinet. Refer servicing to qualified personnel 
only.
THIS APPARATUS MUST BE EARTHED.
Warning
This unit has no power switch.
When installing the unit, incorporate a readily accessible 
disconnect device in the fixed wiring, or connect the power 
plug to an easily accessible socket-outlet near the unit.
If a fault should occur during operation of the unit, operate 
the disconnect device to switch the power supply off, or 
disconnect the power plug.
Warning on power connection
Use a proper power cord for your local power supply.
1. Use the approved Power Cord (3-core mains lead) / 
Appliance Connector / Plug with earthing-contacts that 
conforms to the safety regulations of each country if 
applicable.
2. Use the Power Cord (3-core mains lead) / Appliance 
Connector / Plug conforming to the proper ratings 
(Voltage, Ampere).
If you have questions on the use of the above Power Cord / 
Appliance Connector / Plug, please consult a qualified 
service personnel.
For the customers in the U.S.A.
This equipment has been tested and found to comply with 
the limits for a Class A digital device, pursuant to Part 15 
of the FCC Rules. These limits are designed to provide 
reasonable protection against harmful interference when 
the equipment is operated in a commercial environment. 
This equipment generates, uses, and can radiate radio 
frequency energy and, if not installed and used in 
accordance with the instruction manual, may cause 
harmful interference to radio communications. Operation 
of this equipment in a residential area is likely to cause 
harmful interference in which case the user will be 
required to correct the interference at his own expense. 
You are cautioned that any changes or modifications not 
expressly approved in this manual could void your 
authority to operate this equipment.
All interface cables used to connect peripherals must be 
shielded in order to comply with the limits for a digital 
device pursuant to Subpart B of Part 15 of FCC Rules.
For the customers in Europe
The manufacturer of this product is Sony Corporation, 1-
7-1 Konan, Minato-ku, Tokyo, Japan.
The Authorized Representative for EMC and product 
safety is Sony Deutschland GmbH, Hedelfinger Strasse 61, 
70327 Stuttgart, Germany.
For any service or guarantee matters, please refer to the 
addresses given in separate service or guarantee 
documents.
This apparatus shall not be used in the residential area.
Warning
This is a Class A product. In a domestic environment, this 
product may cause radio interference in which case the 
user may be required to take adequate measures.
For kundene i Norge
Dette utstyret kan kobles til et IT-strømfordelingssystem.
WARNING