Sony 4-155-758-11 (1) User Manual
C:\#WORK\@DPF\DPF-V1000N\Writer-OP\06_FinalDelivery\4155758111\4155758111DPFX1000NCEK\01GB-
DPFX1000NCEK\050C03.fm
Master: Right
DPF-X1000N, DPF-V1000N 4-155-758-11 (1)
61
GB
Adv
anc
ed
op
erati
op
erati
o
n
s
Operating an external
device connected to the
photo frame
device connected to the
photo frame
You can connect a mass-storage-complaint
digital camera, a USB memory device, a photo
storage device, or other external device to the
photo frame and display an image directly from
the external device.
digital camera, a USB memory device, a photo
storage device, or other external device to the
photo frame and display an image directly from
the external device.
Notes
• We cannot guarantee connection with all types of
mass storage devices.
• The playback device will be switched to the
external device if you connect the external device to
the EXT INTERFACE jack during playback the
internal memory.
the EXT INTERFACE jack during playback the
internal memory.
1
Connect the photo frame to the AC
power source. (
power source. (
.page 17)
2
Set the digital camera or external
device to mass storage connection
mode.
device to mass storage connection
mode.
The setting and operation method used
before connecting differ depending on the
digital camera or external device. Refer to
the operating instructions supplied with
the digital camera or external device. (If
you are using a Cyber-shot, set “USB
Connect” to [Normal] or [Mass Storage].)
before connecting differ depending on the
digital camera or external device. Refer to
the operating instructions supplied with
the digital camera or external device. (If
you are using a Cyber-shot, set “USB
Connect” to [Normal] or [Mass Storage].)
3
Turn the photo frame to ON.
(
(
4
Connect the digital camera or
external device to the
EXT INTERFACE connector.
external device to the
EXT INTERFACE connector.
Use the USB cable supplied with the
digital camera or external device to
connect to the photo frame.
digital camera or external device to
connect to the photo frame.
5
Select the playback device.
(
(
.page 40)
An image on the device is displayed on
the screen.
the screen.
For details on the slideshow, refer to
page 29. For details on adding images to
the internal memory, refer to page 32. And
for details on the CreativeEdit function,
refer to page 43.
page 29. For details on adding images to
the internal memory, refer to page 32. And
for details on the CreativeEdit function,
refer to page 43.
Notes
• When using a commercially available USB cable,
use an A-Type USB cable that is less than 3 meters
long.
long.
• Do not disconnect the USB cable or turn the photo
frame and external device off while the access lamp
on the external device is flashing. Doing so may
damage the data stored on the external device. Sony
assumes no responsibility for any damage or loss of
data.
on the external device is flashing. Doing so may
damage the data stored on the external device. Sony
assumes no responsibility for any damage or loss of
data.
• A USB hub or USB device with a built-in USB hub
may not work properly.
• The photo frame cannot use data that has been
encrypted or compressed using, for instance,
fingerprint authentication or a password.
fingerprint authentication or a password.
External
memory or
other external
device
memory or
other external
device