Sony 4-155-758-11 (1) User Manual

Page of 80
C:\#WORK\@DPF\DPF-V1000N\Writer-OP\06_FinalDelivery\4155758111\4155758111DPFX1000NCEK\01GB-
DPFX1000NCEK\100ADD.fm
Master: Left
DPF-X1000N, DPF-V1000N 4-155-758-11 (1)
76 
GB
• CompactFlash Memory Card (Type I/
Type II) and CF+Card (Type I/Type II)-
compatible CompactFlash Card
*6
You can also use the Smart Media card by 
using a commercially available CompactFlash 
card adaptor
*7
.
However, we do not guarantee proper 
operations for all types of CompactFlash cards.
*6
Use a CompactFlash card with a power 
specification of 3.3V or 3.3V/5V. You cannot use 
a type for 3V or 5V only. Do not insert other types 
of CompactFlash card into the photo frame’s 
insertion slot. The photo frame may be damaged. 
The photo frame has been demonstrated as 
operable with a CompactFlash with a capacity of 
32 GB or smaller.
*7
When using a commercially available 
CompactFlash card adaptor, refer to the operating 
instructions of the adaptor you use for how to 
install the card and adaptor. When using a 
CompactFlash card adaptor, a write-protected card 
may not work properly.
• When using a card, make sure to check the 
correct insertion direction of the card and the 
correct insertion slot.
• When inserting the memory card, it will only 
insert part of the way, so do not try to force 
it, as this could damage the memory card 
and/or photo frame.
• Do not remove a card or turn off the photo 
frame while the photo frame is reading or 
writing data, or the access indicator is 
flashing. Otherwise, data may be rendered 
unreadable or be erased.
• We recommend that you save a backup of 
important data.
• Data processed with the computer may not 
be displayed with the photo frame.
• When you carry or store a card, put it in the 
case supplied with it.
• Do not touch the terminal of a card with your 
hand or a metal object.
• Do not strike, bend or drop a card.
• Do not disassemble or modify a card.
• Do not expose a card to water.
• Do not use or store a card under the 
following conditions:
– Locations beyond the required operational 
conditions including locations such as the 
hot interior of a car parked in the sun and/
or in the summer, the outdoors exposed to 
direct sunlight, or a place near a heater.
– Humid locations or locations with 
corrosive substances present
– Locations subject to static electricity or 
electrical noise
Notes on using a memory card