Sony 4-155-700-17 (1) User Manual

33 

GB

U

s

ing
 as
 a 
prin

ter

Pull and open the ink ribbon 
compartment door.

Insert the ink ribbon in the direction 
of the arrow until it clicks into place.

Close the ink ribbon compartment 
door.

Notes

• Do not touch the ink ribbon or store the ink ribbon 

in a dusty location. Fingerprints or dust on the ink 
ribbon may result in imperfect printing.

• Do not rewind the ink ribbon and use the rewound 

ink ribbon for printing. Otherwise, proper printing 
results will not be obtained, or a malfunction may 
occur. If the ink ribbon does not click into place, 
remove it and then re-insert it. Only when the ink 
ribbon is too slack to be loaded, keep pressing the 
core of the ribbon and wind the ink ribbon in the 
direction of the arrow to remove the slack.

 

• Do not disassemble the ink ribbon.

• Do not pull out the ribbon from the ink ribbon.

• Do not remove the ink ribbon while printing.

• Notes on storing printing packs

Avoid placing the printing pack in locations that 
are subject to high temperature (more than 30 °C/
86° F), high humidity, excessive dust or direct 
sunlight.
Please store it in a cool and dark place and use it 
within a short period from the date of production. 
Depending on the storage conditions, the ink 
ribbon may deteriorate. Use of such an ink ribbon 
may affect the printed results, for which we cannot 
guarantee or compensate.

Push up the blue eject lever, and remove 
the used ink ribbon.

Do not wind the ribbon in the 
directions shown here.