Sony 4-259-434-13 (1) User Manual

Page of 40
14 
GB
Let’s view an image
Inserting a memory card
Insert a memory card firmly into the corresponding slot 
with its label side facing toward you (when you are facing 
the back side of the photo frame).
When you insert a memory card
The images on the memory card are automatically displayed. 
If you switch off the power while they are 
being displayed
If you switch the power back on, the same images continue to be 
displayed.
If the access lamp does not flash
Reinsert the memory card after checking the label side of the 
memory card. 
About the B and C slots
If you insert memory cards both into the B and C slots 
simultaneously, the photo frame will not work properly.
Access lamp
CompactFlash 
card
*
 
(Slot A)
xD-Picture 
Card
(Slot B)
SD memory 
card
(Slot B)
“Memory 
Stick”
(Slot B)
“Memory 
Stick Duo”
(Slot C)
PNote 
When using a memory card of the 
following types, make sure to insert 
it in an appropriate adaptor.
If you insert it without an adaptor, 
you may be unable to remove it. As 
shown in the right-most illustration 
below, make sure to insert the 
following types of memory cards 
with inserted in the appropriate 
adaptor.
1
miniSD/miniSDHC
2
microSD/microSDHC
3
“Memory Stick Micro” 
* A CompactFlash card can be used 
with the DPF-XR100 only.
z
 Tip
• S-Frame fails to auto rotate if:
– An image file has been shot with 
a DSC which doesn’t support 
Exif rotate tag recording.
– An image file is retouched and 
saved with retouching software 
which breaks the Exif rotate tag.
1
miniSD/
miniSDHC
adaptor
2
microSD/
microSDHC
adaptor
“M2” adaptor 
(standard size)
3
“M2” adaptor
(Duo size)