Panasonic AJ-P2C064AG User Manual

Page of 212
9
General: Features of Camera unit
Ge
ne
ra
l
Multi-format
Various image formats are realized by switching the 2.2 
Megapixel 2/3 inch 3 CCD between the interlace drive and 
the progressive drive.
Chromatic Aberration Compensation function
The unit is equipped with a function to correct the 
magnification ratio chromatic aberration of lenses caused by 
the fact that the refractive index in lenses varies with the 
wavelength of light (hereinafter referred to as chromatic 
aberration). By using this function, chromatic aberration 
around the lens can be corrected and high definition images 
can be obtained. However, a lens supporting chromatic 
aberration compensation is must be used. (Refer to 
page 105)
Scan Reverse function
The Scan Reverse function, as standard configuration, 
cancels the image inversion that occurs when a lens adapter 
from Canon or Angenieux is used, and it can be switched 
through the menu settings. (Refer to page 171)
Film-REC Gamma function
To facilitate acquisition of pictures with a film-like tone, the 
unit is equipped with a film-like gamma function of the type 
developed for the Varicam (AJ-HDC27 series). (Refer to 
page 184)
2-disk 4-type configuration optical filters
The unit is equipped with CC filters for 3200 K, 4300 K, 
5600 K, and 1/2 ND. The 5600 K CC filter setting, often 
selected for shooting outdoors, and the 1/2 ND setting to 
allow finer adjustments to the lens aperture are provided as 
standard. (Refer to page 19)
14-bit A/D conversion digital signal processing
Analog video signals are processed into digital data by a 14-
bit A/D converter with sampling frequencies of 74 MHz. It is 
possible to reproduce images that are more finely detailed.
DRS (Dynamic Range Stretcher) function
With this function, the dynamic range of high brightness 
areas that may be skipped with white blanks in an ordinary 
recording method can be expanded by compressing images 
and maintaining the contrast. (Refer to page 59)
Lens file function
The unit has 64 lens files.
By using an SD memory card, 64 lens files can be stored. 
(Refer to page 100)
Focus assist function
The unit will display a marker to help with focusing when 
shooting videos. This function provides a visual cue for 
focusing. (Refer to page 59)
Data management function
Within the unit, one user data file and 16 sets of scene file 
data can be saved.
By using an SD memory card as the setup card, up to 8 sets 
of setup data can be stored. (Refer to page 91)
Color bar
The unit employs the SMPTE color bar, Split color bar for 
SNG (Satellite News Gathering) as well as the conventional 
color bar, which is useful for adjusting the color monitor. 
(Refer to page 193)
VFR
This unit has a VFR function which allows overcrank and 
undercrank shooting. (Refer to page 38)
Monitor Gamma
When the gamma setting is set to “FILM-REC”, images with 
FILM-REC gamma characteristics (Nega look images) are 
output to the HD SDI A · B outputs, the monitor, the 
viewfinder, the remote control unit and the LCD, and 
recorded to the P2 card.
It is possible to convert the monitor output image, viewfinder 
output image, remote control output image, and LCD output 
image, out of different output images, to a higher contrast 
image (POSI LOOK image) by operating this function.
P-10LOG
It is possible to select the image signal data format suitable 
for workflow of film production DI (DIGITAL 
INTERMEDIATE). Color rendering properties are enhanced 
by the 2D-CMS (2 dimensional color management system). 
It is valid against the output signals of the Dual Link (RGB 
4:4:4).
But, it will not be reflected to a recording onto the P2 card.
Cinematographer settings
Only the menu items that are used often for a film production 
are collected, and registered in USER MENU. Also, each 
menu item is set to a value suitable for film production.
Features of Camera unit
AJ-HPX3700G-VQT1V68_eng.book  9 ページ  2008年10月15日 水曜日 午後6時38分