Panasonic AG-HMC152EN User Manual

Page of 112
106
Updating the driver in the camera
For the latest information or the updating procedure on drivers, visit the Support Desk at the following Web 
sites.
Cleaning
When cleaning, do not use benzene or thinner.
Using benzine or paint thinners may deform the 
camera-recorder and/or cause the surface finish 
to peel off.
Before proceeding with maintenance, remove the 
battery or disconnect the AC cord from the power 
outlet.
Use a soft, clean cloth to wipe the camera-
recorder. To remove stubborn dirt, wipe the 
camera-recorder with a cloth moistened with 
kitchen detergent that has been diluted with 
water and then use a dry cloth to take up the 
remaining moisture.
Cleaning the Viewfinder
If there is dust inside the viewfinder, remove the 
eye cup holder and get rid of the dust.
The interior of the eye cup holder is specially 
finished, so do not ever wipe it. If there is dust on 
it, blow it off with an air blower.
Remove the eye cup holder with the eye cup 
attached by rotating it counterclockwise. (It will 
be tightly screwed on.) When you do this, tilt the 
viewfinder slightly upward.
To mount the eye cup holder, align the ridges 
and grooves of the eye cup holder and camera-
recorder, and turn clockwise until the holder 
clicks into place.
Eye cup holder
Eye cup
Projections