Panasonic AG-HMC152EN User Manual

52

In the following example, TITLE001 is the 
filename. (To change the filename, see the 
description below.)

To read files
1)  

Select READ in step

 and push the Operation 

lever.

2)  

Select the file number and push the Operation 
lever.

3)  

Select YES on the confirmation screen.

     READ COMPLETED will be displayed when 

reading is complete.

To add titles to files
1) Go through steps 

.

2)  

Tilt the Operation lever in the     directions to 
select characters, and tilt in the   direction to 
move to the next character.
The following characters may be inputted.
(Space), A-Z, 0-9, : ; < = > ? @ [ ] ^ _ - . /

3)  

Push the Operation lever when all characters 
have been inputted.

4)  

Select YES on the confirmation screen.

If WRITE NG WRITE PROTECT appears, 
release the protected status of the SD Memory 
Card.
If WRITE NG CANNOT ACCESS appears, quit 
all other operations (such as playback) before 
proceeding.

•

•

•

You can save up to four scene file settings or other 
settings as files on an SD Memory Card, and you 
can also load them from the card.

In the case of the scene files, the current settings 
are automatically saved in the unit, and the 
saved data is written on an SD Memory Card. 
When data has been read from an SD Memory 
Card, the current settings are rewritten at the 
same time as the data saved inside the unit.
The data in all the scene files, F1 to F6, is 
rewritten.

If you have saved a scene file

menu SCENE FILE screen, select WRITE, 
and push the Operation lever.
For all other settings, select USER FILE.

For menu operations (Page 82) 
Operations may also be performed using buttons 
on the remote control that correspond to those 
on the camera. For details, see “Description of 
parts (Remote control)”. (Page 18)

•

•

•
•