Panasonic AG-HMC152EN User Manual

86

Reads and writes scene files on the SD Memory Card.
READ:  

Reads scene files (all scenes, F1 to F6) saved on the SD Memory Card 
after setting values are selected.

WRITE:  Saves current scene file setting values (for all scenes, F1 to F6) on the 

SD Memory Card.

   

Returns to the last screen.

LOAD:  Loads the scene file settings which is saved by this camera.
SAVE:  Saves the changed scene file settings.
INITIALIZE:  

The settings of the scene file selected with the SCENE FILE dial 
are returned to the factory settings.

   

Returns to the last screen.

Adjusts the synchro scan shutter speed used for shooting images on a TV 
screen, etc.
Holding the Operation lever toward the   or   will cause the values to change at 
a faster rate.

  1/50.0 … 1/248.9 (Factory default setting is 1/48.0.)

  1/25.0 … 1/48.0 … 1/248.9

•

•

Adjusts the level of the image outline correction (in the horizontal and vertical 
directions).
- 7…0…+ 7

Adjusts the level of outline correction in the vertical direction.
- 7…0…+ 7

Adjusts the level of noise reduction of the detail signal.
- 7…0…+ 7
Set to – for a clearer image. Noise increases slightly.
Set to + to reduce noise.

Adjusts the chroma level.
- 7…0…+ 7

Makes fine adjustments to the chroma phase.
- 7…0…+ 7

Makes fine adjustments to the color temperature (after white balance Ach 
adjustment).
- 7…0…+ 7

Makes fine adjustments to the color temperature (after white balance Bch 
adjustment).
- 7…0…+ 7

Adjusts the master pedestal (black level of the image) as the basis for images.
- 100…0…+ 100

Sets the desired AUTO IRIS level.
- 10…0…+ 10

        indicates the factory setting.