Panasonic AG-HMC152EN User Manual

94

Selects the brightness level of the left-leaning zebra patterns on the screen.
50%, 55%, 60%, 65%, 70%, 75%, 80%, 85%, 90%, 95%, 100%, 105%

Selects the brightness level of the right-leaning zebra patterns on the screen.
50%, 55%, 60%, 65%, 70%, 75%, 80%, 85%, 90%, 95%, 100%, 105%, OFF

The zebra patterns do not appear if you select OFF.

•

Select ON to display the marker. (Page 42)
ON   OFF
To display the marker, press the ZEBRA button.

Sets SAFETY ZONE. (Page 78)
90%, 4:3, OFF

Selects counter operation during recording.
TOTAL:   The count continues to increase until the RESET/TC SET button is 

pressed to reset it. 

CLIP: 

 Resets the counter at start of recording and counts the time of each 
recording session.

In PB mode, operation is always in CLIP mode. 

•

Select ON to output the information displayed on the screen together with the 
signals from the VIDEO OUT jack.
ON   OFF

Sets whether to display the date and time on the screen and whether to output 
from the VIDEO OUT jack.
TIME:  The time is displayed.
DATE:  The date is displayed.
TIME & DATE: The date and time are displayed.
OFF: 

The date and time are not displayed.

Select ON to display the audio level meter.
ON   OFF

Selects the unit of zoom and focus values.
OFF, NUMBER, mm/feet, mm/m

Use the mm/feet or mm/m display only as a general guideline since it is not 
entirely accurate.

•

Select ON to display the remaining SD Memory Card recording capacity and 
remaining battery charge.
ON   OFF

Select how much information to display on the viewfinder and the LCD monitor. 
(Page 81)
PARTIAL, ALL, OFF

Adjusts the backlight of the LCD monitor. Select HIGH for brighter backlight.
LOW, NORMAL, HIGH

Adjusts the display level of the images on the LCD monitor. (Page 26)
LCD COLOR LEVEL
LCD BRIGHTNESS
LCD CONTRAST

Adjusts the display level of the images on the viewfinder. (Page 26)
EVF COLOR LEVEL
EVF BRIGHTNESS
EVF CONTRAST

        indicates the factory setting.