Panasonic AJ-HPX3700G User Manual
112
Adjustments and Settings for Recording: RGB 4:4:4 Output and P-10LOG Settings
This unit can output signals suitable for Digital-Intermediate,
which is a film production workflow.
which is a film production workflow.
Link A signal is output from the HD SDI A connector and
Link B signal is output from the HD SDI B connector by
performing the cinematograph setting, and it is possible to
set these signals as P-10LOG for RGB 4:4:4 output. For
cinematograph settings, see page 109 and later.
Refer to the following procedures to set the above without
using the cinematograph setting.
Link B signal is output from the HD SDI B connector by
performing the cinematograph setting, and it is possible to
set these signals as P-10LOG for RGB 4:4:4 output. For
cinematograph settings, see page 109 and later.
Refer to the following procedures to set the above without
using the cinematograph setting.
1
Open the <GAMMA> screen from the PAINT page with
menu operation.
menu operation.
2
Select GAMMA MODE SEL using the JOG dial button,
and press the JOG dial button.
and press the JOG dial button.
3
Turn the JOG dial button and select “FILM-REC”, then
press the JOG dial button.
press the JOG dial button.
4
Open <OUTPUT SEL> screen from SYSTEM SETTING
page with menu operation.
page with menu operation.
5
Select SIGNAL FORMAT using the JOG dial button, and
press the JOG dial button.
press the JOG dial button.
6
Turn the JOG dial button and select “4:4:4”, then press
the JOG dial button.
the JOG dial button.
7
Select P-10LOG using the JOG dial button, and press
the JOG dial button.
the JOG dial button.
8
Turn the JOG dial button and select “ON”, then press
the JOG dial button.
the JOG dial button.
9
Press the MENU button to complete the menu
operation.
operation.
Notes
Recording to the P2 card and MON OUT signal will be
YP
YP
B
P
R
4:2:2 even if the signal is set to P-10LOG for RGB
4:4:4.
If you select “ON” in P-10LOG setting, 2D-CMS will
operate in accordance with P-10LOG as well.
If you select “ON” in P-10LOG setting, 2D-CMS will
operate in accordance with P-10LOG as well.
RGB 4:4:4 Output and P-10LOG Settings
RGB 4:4:4 Output and P-10LOG Settings
･
Example of Digital Cinema Recording
Film camera
AJ-HPX3700G
Ð
Ð
Equipment to convert
film to digital data
Ð
Convert
film to
data
Hard disk recorder, etc.
Ð
Color grating process
Ð
Film recording
Ð
Film print
Ð
Screening
Transition Chart of FILM-REC Gamma to P-
10LOG
10LOG
100
50
0
VIDEO-REC
FILM-REC
P-10LOG
1000
500
0
-5 stop
-4 stop
-3 stop
-2 stop
-1 stop
Normal
+1 stop
+2 stop
+3 stop
+4 stop
-6
-5
-4
-3
-2
-1
0
1
2
3
4
5
6
30
NORMAL
18% GRAY
18% GRAY
AJ-HPX3700G-VQT1V68_eng.book 112 ページ ２００８年１０月１５日 水曜日 午後６時３８分