Panasonic AJ-P2C004HG User Manual
28
Parts and their Functions: Viewfinder
You can use the following viewfinder (optional) on the unit:
HD Viewfinder: AJ-HVF21G (selectable between 59.94 and 50 Hz)
HD Viewfinder: AJ-HVF21G (selectable between 59.94 and 50 Hz)
1. Viewfinder (optional)
During recording or playback, the viewfinder displays
the video image in monochrome. It also displays
warnings, messages, zebra patterns, markers (safety
zone and center markers), etc.
the video image in monochrome. It also displays
warnings, messages, zebra patterns, markers (safety
zone and center markers), etc.
2. ZEBRA (zebra pattern) switch
This switch is used to display the zebra pattern in the
viewfinder.
viewfinder.
ON:
Zebra pattern displayed.
OFF:
No zebra pattern displayed.
3. TALLY switch
Used to control the 7. Front tally lamp.
HIGH:
Front tally lamp brightly illuminated.
OFF:
Front tally lamp stays off.
LOW:
Front tally lamp dimly illuminated.
4. PEAKING control
Used to adjust the outlines of the video image in the
viewfinder for easier focusing. This does not affect the
signal output from the camera.
viewfinder for easier focusing. This does not affect the
signal output from the camera.
5. CONTRAST control
Used to adjust the contrast of the video image in the
viewfinder. This does not affect the signal output from
the camera.
viewfinder. This does not affect the signal output from
the camera.
6. BRIGHT control
Used to adjust the brightness of the video image in the
viewfinder. This does not affect the signal output from
the camera.
viewfinder. This does not affect the signal output from
the camera.
7. Front tally lamp
This lamp is activated when the 3. TALLY switch is
positioned at [HIGH] or [LOW], and stays on during
recording. It also blinks in synchronization with the REC
lamp in the viewfinder, and provides alerts.
Use the TALLY switch to change the intensity of the
lamp to ([HIGH] or [LOW]).
positioned at [HIGH] or [LOW], and stays on during
recording. It also blinks in synchronization with the REC
lamp in the viewfinder, and provides alerts.
Use the TALLY switch to change the intensity of the
lamp to ([HIGH] or [LOW]).
8. Back tally lamp
This lamp stays illuminated during shooting. It also
blinks in synchronization with the REC lamp in the
viewfinder, and provides alerts.
When the lever is positioned at [OFF], the back tally
lamp is hidden.
blinks in synchronization with the REC lamp in the
viewfinder, and provides alerts.
When the lever is positioned at [OFF], the back tally
lamp is hidden.
9. Eyepiece
Note
Do not leave the eyepiece aimed at the sun. Doing so
may damage the internal components.
may damage the internal components.
10. Diopter adjustment ring
Use this to make adjustments in line with your diopter, in
order to obtain optimum clarity in the viewfinder image.
The adjustable range of the viewfinder view angle is
shown in the following table.
order to obtain optimum clarity in the viewfinder image.
The adjustable range of the viewfinder view angle is
shown in the following table.
For an eyepiece for presbyopia, consult the dealer.
11. Connecting plug
12. Locking ring
13. Microphone holder
14. Viewfinder stopper
Used to attach or remove the viewfinder.
Viewfinder
1
2
3
4 5
6
8
13 14 11 7
9
10
12
Product Number
Adjustable range
AJ-HVF21G
–0.9 D to –4.4 D
AJ-HPX2700G-VQT1V27_eng.book 28 ページ ２００８年９月２日 火曜日 午後５時４３分