Panasonic AJ-P2C004HG User Manual

Page of 206
87
Adjustments and Settings for Recording: Selection of video output signals
Ad
justment
and S
ett
ings
 fo
r Recor
ding
The unit employs the HD SDI A · B connector and the MON OUT connector as connectors for outputting video signals.
Change the characters of the signal output from the HD SDI 
A · B connector using the <OUTPUT SEL> screen from the 
menu. The character content output from the HD SDI A · B 
connector and MON OUT is the same.
The signals output from the HD SDI A · B connector are 
switched with the HD SDI A · B switch.
However, the switching operation is not acknowledged 
during the recording operation.
MEM:
During EE, such as recording, video images 
taken by the camera are output. Meanwhile, 
signals on the P2 card are output during 
playback.
CAM:
The camera images are output at all times.
OFF:
No signal is output from the HD SDI A · B 
connector.
a. HD SDI A · B switch
Selection of video output signals
Settings of signals output from HD SDI A · B connector
Item
Variable 
range
Remarks
OUTPUT 
ITEM
MENU 
ONLY
TC
STATUS
Set the characters to be superimposed 
on the output signals from the HD SDI A 
· B connector and MON OUT connector.
MENU ONLY:
The menu screen is 
superimposed only when the 
menu is accessed. This normally 
displays nothing.
TC:
Time codes are superimposed. 
(When the menu is accessed, 
the menu screen is 
superimposed.)
STATUS:
The characters that are the 
same as the characters 
superimposed in the viewfinder 
screen are superimposed.
(When the menu is accessed, 
the menu screen is 
superimposed.)
HD SDI A · 
B CHAR
OFF
ON
ON:
The characters are 
superimposed on the HD SDI A · 
B connector.
OFF:
The characters are not 
superimposed on the HD SDI A · 
B connector.
a
HD SDI A
・B
TCG
CHARACTER
OUTPUT SEL
MEM
CAM
OFF
F-RUN
SET
R-RUN
ON
OFF
MEM
CAM
OFF
MON OUT
AJ-HPX2700G-VQT1V27_eng.book  87 ページ  2008年9月2日 火曜日 午後5時43分