Panasonic AG-HVX200AP User Manual

You can edit the video data on P2 cards nonlinearly 
by connecting the unit to a computer used for 
editing by means of a USB cable (Windows) or 1394 
cable (Apple Macintosh). (Connections : Page 78)

The following conditions must be met if 
the USB cable is to be used to make the 
connection.
•  Your computer must run Windows 2000, Windows 

XP or Windows Vista.

•  USB dedicated driver (provided on the CD-ROM 

supplied) must be installed in your computer.

•  Your computer must support USB2.0 (High 

Speed, Mass Storage Class).

  (USB 1.1 is not supported.)
•  Only one computer can be connected.
•  When the unit is connected via USB cable, the 

series name of the unit, “AG-HVX200”, should 
appear on the computer screen.

•  No operations can be performed if a hub or other 

unit is connected between the unit and your 
computer.

  Do not use a USB cable longer than 3 meters. 

Otherwise, malfunctions may occur.

•  Operation is not guaranteed in Macintosh 

operating systems.

The following conditions must be met if 
the 1394 cable is to be used to make the 
connection.
•  Your computer must run Apple MacOSX 10.3 or 

later.

•  Your computer must support 1394.a (SBP2 

protocol).

•  Operation is not guaranteed in Windows 

operating systems.

•  The series name of the unit, “AG-HVX200”, 

should appear on the computer screen.

•  Insert the P2 card into the unit, and set the 

MEDIA switch to the P2 position. (Page 25)

•  For menu operations (Page 97)
•  You can also use the menu buttons on the 

remote control. (Page 15)