Panasonic AJ-P2C002SG User Manual
34
Recording and Playback: Basic Procedures
For shooting, follow the steps below.
1
Select a filter according to light conditions.
2
When the white balance is saved:
Position the WHITE BAL switch to [A] or [B].
Position the WHITE BAL switch to [A] or [B].
When the white or black balance is not saved and
you have no time to adjust the white balance:
Position the WHITE BAL switch to [PRST].
This adjusts the white balance against the filter
according to the position of the FILTER control.
you have no time to adjust the white balance:
Position the WHITE BAL switch to [PRST].
This adjusts the white balance against the filter
according to the position of the FILTER control.
If the white balance is adjusted on the spot:
Position the WHITE BAL switch to [A] or [B] and shoot a
white test subject so that it appears at the center of the
screen. Then, follow the steps below to adjust the white
balance.
1 Press the AUTO W/B BAL switch toward [AWB] to
Position the WHITE BAL switch to [A] or [B] and shoot a
white test subject so that it appears at the center of the
screen. Then, follow the steps below to adjust the white
balance.
1 Press the AUTO W/B BAL switch toward [AWB] to
adjust the white balance.
2 Press the AUTO W/B BAL switch toward [ABB] to
adjust the black balance.
3 Press the AUTO W/B BAL switch toward [AWB] to
adjust the white balance again.
For directions on making adjustments, see [Adjusting
the White Balance] (page 49) and [Adjusting the Black
Balance] (page 52).
the White Balance] (page 49) and [Adjusting the Black
Balance] (page 52).
3
Point the camera at your subject to adjust the focus, and
zoom.
zoom.
4
To use the electronic shutter, set the shutter speed and
operation mode.
For more information, see [Setting the Electronic
Shutter] (page 53).
operation mode.
For more information, see [Setting the Electronic
Shutter] (page 53).
5
Press either the REC START/STOP button or VTR
button at the lens to start recording.
During recording, the REC lamp in the viewfinder stays
illuminated.
button at the lens to start recording.
During recording, the REC lamp in the viewfinder stays
illuminated.
6
To stop recording, press either the REC START/STOP
button or VTR button at the lens.
The REC lamp in the viewfinder goes out.
button or VTR button at the lens.
The REC lamp in the viewfinder goes out.
White/Black balance adjustment to recording completion
White/Black Balance Adjustment to Recording Completion
Operation Buttons
During recording, all operation buttons (REW, FF, PLAY/
PAUSE, STOP) are disabled.
During recording, all operation buttons (REW, FF, PLAY/
PAUSE, STOP) are disabled.
1
3
2
2
4 5, 6
AJ-HPX2700G-VQT1V27_eng.book 34 ページ 2008年9月2日 火曜日 午後5時43分