Panasonic AK-HCU200E User Manual

26

You can connect the unit and a computer, and configure various settings 

from the Web browser screen .

Use a LAN cable (crossover cable) to directly connect the unit’s LAN 

connector for computer connections and the computer .

Set an IP address for the computer within the private address range 

while ensuring that it is different from the address of the unit . Set the 

subnet mask to the same address as the unit .

Network settings of the unit (default settings)

z

z

IP address: 192 .168 .0 .20

z

z

Subnet mask: 255 .255 .255 .0

z

z

Port number: 80

z

z

Default gateway: 192 .168 .0 .1

Start the Web browser, and enter 

“http://192 .168 .0 .20” in the [Address] 

box of the Web browser .

If the IP address is changed, the URL will also be different .

If this is the case, use the new IP address in the URL (http://new IP 

address/) .

z

z

To move from one menu to another, select the desired menu on the left 

of the screen .

This is equivalent to “TOP MENU” displayed on the 

picture monitor .

When either “OPERATION” or “MAINTENANCE” is 

selected above, the corresponding menu items are 

displayed here .

In the example shown, the OPERATION menu items 

are displayed .

The setting screen corresponding to the menu item 

selected here is displayed on the right .

z

z

When using Internet Explorer, do not use [

Back] or [

Next] .

z

z

Select a menu item on the left of the screen to display the setting screen 

corresponding to that item .