Panasonic AK-HCU200E User Manual

4

„

„

The warning information is displayed when trouble is detected in the 

unit, camera, or optical fiber multi cable .

The warning information items are displayed top aligned .

A displayed warning information item is cleared when the status 

becomes normal .

CAM RCV LVL NG

The level of the optical signal received by the 

camera is low .

CCU RCV LVL NG

The level of the optical signal received by the 

unit is low .

CABLE OPEN

The optical fiber multi cable is not connected .

CABLE SHORT

The optical fiber multi cable is shorted .

CAM FAN NG

Trouble with the cooling fan of the camera .

CCU HIGH TEMP

The temperature of the unit is abnormally high .

CAM WARM-UP

The camera is warming up .

ROP SAVING DATA

The data managed by the camera and this unit 

is being saved to the memory card in the ROP .

To clear the warning information displays, press the button below .

ROP (AK-HRP200): CHARA button

„

„

When the information is not displayed on the picture monitor, display it 

by pressing the CHARA button of the ROP .

The camera number is displayed at the top left of the screen, the IRIS 

level is displayed at the bottom of the screen, and the IRIS f-value is 

displayed at the bottom right of the screen .

Set each item to be displayed on the “PM VIEW SETTING” screen that 

can be accessed by selecting “MAINTENANCE” on the menu .

However, this screen will not appear if the menu’s “IRIS LEVEL” setting 

is “OFF” .

*:  The IRIS level is displayed based on the IRIS f-value .

„

„

From the IRIS display screen, press the CHARA button of the ROP to 

display the statuses .

The camera number, scene file number, shutter value, and extender 

information are displayed at the top of the screen . The ND filter value, 

gain value, and IRIS f-value are displayed at the bottom of the screen .

Set each item to be displayed on the “PM VIEW SETTING” screen that 

can be accessed by selecting “MAINTENANCE” on the menu .

However, when the “IRIS LEVEL” setting is “OFF”, the screen will be 

displayed first if the CHARA button of the ROP is pressed when the 

information is not displayed on the picture monitor .

*:  The camera format value indicates the format of the signal output 

from the camera .