Insignia NS-CR2031 User Manual
7
Insignia SC/MMC/MS Memory Card Reader NS-CR2031
www.insigniaproducts.com
4 Type a name into the Volume Label box. The name of your memory
card appears next to the icon.
5 Click Start, then click OK in the Warning dialog box.
6 Click OK on the Format Complete window.
7 Click Close to finish.
Formatting a memory card (Macintosh)
If your computer has trouble recognizing a new memory card, format the
memory card in your device or by using the computer.
memory card in your device or by using the computer.
To format a memory card:
1 Click Go, then click Utilities.
2 Double-click Disc Utility from the list.
3 In the left-hand column, select the memory card you want to format,
then click the Erase tab.
4 Specify a volume format and name for the memory card, then click
Erase. A warning box opens.
5 Click Erase again. The Erase process takes a minute or so to erase and
reformat your memory card.
Troubleshooting
If memory cards do not appear in My Computer/Computer (Windows
operating systems) or on the desktop (Mac operating systems), check the
following:
•
operating systems) or on the desktop (Mac operating systems), check the
following:
•
Make sure that the memory card is fully inserted into the slot.
•
Make sure the card reader is fully connected to your computer.
Unplug and reconnect your card reader.
Unplug and reconnect your card reader.
•
Try a different memory card of the same type in the same slot. If a
different memory card works, the original memory card should be
replaced.
different memory card works, the original memory card should be
replaced.
•
Disconnect the cable from your card reader and shine a flashlight into
the empty card slots. Look to see if any pin inside is bent, then
straighten bent pins with the tip of a mechanical pencil. Replace your
memory card reader if a pin has bent so much that it touches another
pin.
the empty card slots. Look to see if any pin inside is bent, then
straighten bent pins with the tip of a mechanical pencil. Replace your
memory card reader if a pin has bent so much that it touches another
pin.
Caution
Formatting a memory card permanently deletes all files on the
card. Be sure that you copy any valued files to a computer before
formatting a memory card. Do not disconnect the card reader or
remove the memory card while formatting is in progress.
card. Be sure that you copy any valued files to a computer before
formatting a memory card. Do not disconnect the card reader or
remove the memory card while formatting is in progress.
NS-CR2031_14-0030_MAN_V1_ENG.fm Page 7 Thursday, May 22, 2014 1:49 PM