Insignia NS-WSCC Leaflet

Thank you for purchasing this high-quality Insignia 
infrared shutter control for your Canon camera. Because 
you do not touch your camera when using the shutter 
control, you experience less camera vibration and get 
sharper pictures. Your shutter control is especially useful 
for taking self-portraits.

•  Remote Wireless Shutter Control with battery
• Lanyard
•  Quick Setup Guide

1 Pull the plastic insulation sheet out of your shutter 

control before using it the first time.

2 Set your camera to IR mode. For instructions, see the 

documentation that came with your camera. 

3 Attach your camera to a tripod, or place it on a steady 

surface like a shelf or table.

4 Point your shutter control directly at your camera’s IR 

receiver, then press the shutter button on the front of 
your shutter control. When your camera receives the 
IR signal, it automatically focuses and takes a picture.

If your camera does not focus and take pictures:
•  Make sure that your shutter control is within 

16.4 ft (5 m) of the camera’s IR receiver.

•  Make sure that your camera is in IR mode. See your 

camera’s user manual to activate the IR mode.

•  Make sure that your camera has an autofocus feature. 

See your camera’s user manual to activate auto focus 
(if available).

•  Make sure that the battery for the shutter remote 

control is not expired. Replace with a CR2025 battery 
if necessary.

•  Make sure the line of site between the transmitter and 

the infrared receiver is not blocked by the lens or 
other obstacles.

Before using your new product,

please read these instructions to prevent any damage.

Plastic insulation 

sheet

Battery holder

Shutter button

Quick Setup Guide  |

  

 NS-WSCC

Scan for compatibility chart