Mamiya Digital Back DCUG1205N01 User Manual

90

Check that dust or dirt does not adhere to

the IR/Low Pass Filter by holding the cam-

era and light shines on the filter.

* Dust and dirt is more conspicuous when light is

shined on the filter.

Carefully remove all dust with a lens blower

that is available on the open market.

* When using a blower, make sure the tip does not

come into contact with the surface of the filter.

* Use a lens blower that is not equipped with a

brush. The use of a blower with a brush may re-
sult in the surface of the filter being scratched.

• Always place the lens selector lever in the L when this unit is not going be

used.

• Remove the lithium ion battery and store it in a well ventilated place when

this unit is not going to be used for an extended period.

• Never try to dismantle or modify the camera in any way.
• The connections could become loose or corroded if they are damaged or

become dirty.

• Use this unit carefully to avoid dropping or banging against other items.
• Use a damp cloth that has been soaked in water and then wrung to clean the

camera if it has been exposed to salty air.

• This unit may be damaged if used/stored in areas where chemical gasses

are present.

• Wipe with a soft, dry cloth when cleaning. Do not use solvents, etc. The

product can cause discoloration.

• Before using this unit after it has been in storage for an extended period, it is

important that either you or your nearest customer service center carry out a
few simple checks to make sure this unit is operating correctly.

 08_ZD back_E_p089-090

07/3/9, 20:43

90