Sony 370PK2 User Guide
70
Chapter 3
Shooting
Chapter 3 Shooting
EJECT
F FWD
STOP
PLAY
REW
Playback — Checking Recorded Contents
Checking the Recorded Contents
Immediately After Shooting
— Recording Review
Immediately After Shooting
— Recording Review
Immediately after shooting, you can use the recording
review function to automatically rewind and play back
the last 2 to 10 seconds of the recording to check the
recorded contents.
review function to automatically rewind and play back
the last 2 to 10 seconds of the recording to check the
recorded contents.
Performing recording review
With recording paused, press the RET button on the
lens.
With recording paused, press the RET button on the
lens.
Depending on how long you hold down the button, the
tape is automatically rewound over the last 2 to 10
seconds of the recording, and then this last part of the
recording is shown in the viewfinder. You can also
listen to the recorded sound via an earphone or the
speaker. After the recorded part is played back, the
camcorder is automatically returns to the pause state.
tape is automatically rewound over the last 2 to 10
seconds of the recording, and then this last part of the
recording is shown in the viewfinder. You can also
listen to the recorded sound via an earphone or the
speaker. After the recorded part is played back, the
camcorder is automatically returns to the pause state.
Notes
• During recording review, do not turn the POWER
switch off. The camcorder may not be able to find the
continue point.
continue point.
• When the ClipLink function is set to oFF and you
press the VTR button on the camcorder or the lens
during recording preview, the recording preview is
halted and recording starts. In this case, back space
editing is not possible.
during recording preview, the recording preview is
halted and recording starts. In this case, back space
editing is not possible.
• When a CCU (camera control unit) is connected, the
lens RET button does not function for recording
review.
review.
Viewing Monochrome Playback
in the Viewfinder
in the Viewfinder
You can view a monochrome playback of the
recording in the viewfinder.
recording in the viewfinder.
1
Turn the power on.
2
Load a cassette.
3
Press the PLAY button.
This starts playback, during which a monochrome
playback of the recording is shown in the
viewfinder.
playback of the recording is shown in the
viewfinder.
F FWD button
STOP button
REW button
PLAY button
Note
If two or more series of Index Pictures are recorded
separately on the tape, they may be played back at
back space editing points.
separately on the tape, they may be played back at
back space editing points.
For details about Index Pictures, see “ClipLink Shooting”
(page 77).
(page 77).
Viewing Color Playback
Using a color television or color video monitor, you
can view a color playback (with no playback adaptors).
can view a color playback (with no playback adaptors).
Connect a color television or color video monitor to
the MONITOR OUT connector or the S VIDEO OUT
connector.
See the previous section “Viewing Monochrome
Playback in the Viewfinder” for playback operation.
the MONITOR OUT connector or the S VIDEO OUT
connector.
See the previous section “Viewing Monochrome
Playback in the Viewfinder” for playback operation.
Operation
Step
Fast forward the tape
Press the F FWD button.
Rewind the tape
Press the REW button.
Stop the tape
Press the STOP button.