Sony aws-g500 User Manual

  C
h

a

p

ter

 3

  O
p

er

at

io

ns

144

Recording Video and Audio on an External Device

Program video and audio are always output as SDI signals from the PGM SDI 
output connector.
Connect the VCR to the PGM SDI output connector and then start recording on 
the VCR.

If the video output signal format (NTSC/PAL) of this unit is changed, the format 
in which signals are output from the PGM SDI output connector also changes.

You record the input source on an external hard disk connected to the i.Link 
connector (HDD) of the interface module.
With video input to an interface module to which an external hard disk drive is 
connected, and audio with the same source number as the video combined 
together, two inputs can be recorded simultaneously.

• It is not possible to record with an external recorder connected to the i.LINK 

connector (HDD).

• When recording on the hard disk, be sure to read the section “External Hard 

Connect the external hard disk to the i.LINK (HDD) connector of the 
interface module (6-pin).

Connect the disk to the same interface module as the input you want to 
record.

Video

ACCESS menu settings (Adjustment is not possible for DV 
video)

Audio

ACCESS menu [Input Trim] setting (analog audio only)

Top menu [Audio MIC/LINE Level] setting

File name

YYMMDD-(source number)-(3-digit suffix) (.avi)

File format

DV format (.avi)

Timecode

Not included

i.LINK connector (6-pin)