Sony aws-g500 User Manual

163

Video/Audio Signal Adjustments and Settings

  C
h

a

p

ter

 3

  O
p

er

at

io

ns

  Output format for a computer monitor (computer RGB 

signals).

  Output format for a video monitor (video RGB signals).

Press the MENU button to close the menu.

• Changing this setting may cause temporary breakup of the output video.
• If the video output signal format is PAL, then when the [XGA] or [SXGA] 

setting is used, the edge of the image will be missing in the output from the 
composite video and S video output connectors. This can be remedied by 
setting [Video RGB], but in this case the computer monitor output will not 
be available.

• We recommend that you set this to 60 Hz when the video output signal is 

NTSC format, and 75 Hz when the signal is PAL format.

• When [Video RGB] is selected, the number of valid scan lines is 

automatically set to 480 and the frequency to 60 Hz if the output signal 
format is NTSC, or to 576 lines and 50 Hz when the format is PAL.

• For details of the output signal format, see under video outputs in the 

• The video image quality for each signal is as follows. Select the best 

setting for a particular requirement.

* This occurs if the original frame frequency of the shot video and the RGB output 

frame frequency or signal processing frequency of a plasma display or projector 
are not in a whole number ratio.

Adjust this setting when the program output video appears blurry or the picture 
flickers.

Press the MENU button.

In the top menu, select [Video Output].

Computer RGB signal 
(RGB output connector)

Very clear

Depending on the 
combination, the motion 

may be slightly jerky

*

Video RGB signal (RGB 
output connector)

Standard video quality 
(very slightly blurred)

Smooth

Composite/S-Video 
signal (composite video 
output connector/S-video 
output connector)

Standard video quality 
(somewhat more blurred 
than the Video RGB  
signal)

Smooth