Canon 430EX User Manual
25
6
Set the master unit’s flash mode
to <a>.
to <a>.
The slave unit(s) will also be
automatically set to <a>.
automatically set to <a>.
7
Check that the flash is ready.
When the slave unit is ready to fire,
the AF-assist beam will blink once
each second.
the AF-assist beam will blink once
each second.
8
Check the flash operation.
Press the master unit’s test firing
button.
button.
X
The slave unit will fire. If the flash
does not fire, adjust the slave unit’s
angle toward the master unit and
distance from the master unit.
does not fire, adjust the slave unit’s
angle toward the master unit and
distance from the master unit.
9
Set the camera and shoot.
Set the camera in the same way as
with normal flash shooting.
with normal flash shooting.
80°
8m (26.2ft.)
12m (39.4ft.)
Indoors
Outdoors
Sample wireless flash setup
Master
unit
unit
Slave A
Slave B
A52_E.book Page 25 Friday, June 10, 2005 4:40 PM
COP
Y