RCA ProV950HB User Manual

P R O V 9 5 0 H / p p .   0 0 8 - 0 1 1 ;   9 6 / 5 / 8 / 1 4 : 0 0

Use the optional SDC100 car battery adapter
(shown on page 58) to power the camcorder from
your car battery.

Open the battery compartment door
release on the bottom of the camcorder
and insert the DC cable connecting plate
in the camcorder.

Pass the DC cable through the battery
compartment notch, then close the battery
compartment door.

Insert the DC cable plug into the DC OUT
jack on the car battery adapter.

Start the car engine and leave it idling.
Then, insert the power cord plug of the car
battery adapter into the cigarette lighter
socket.

• See the SDC100 operation manual for details.

• Use only in DC 12 V or 24 V negative ground

system cars. Positive-ground car batteries
CANNOT BE USED. Check your car operation
manual or consult a local car dealer.

• Use the car battery adapter only when the car is

idling or being driven. Otherwise, the car’s
battery will be drained.

• Before starting the car engine, the car battery

adapter must be unplugged from the cigarette
lighter socket.

• Before removing either the DC plug or the

cigarette lighter plug, the camcorder’s Power
switch should be set to OFF.

• Do not apply strong force to the DC cable

connected to the camcorder as this will cause a
malfunction.

DC Cable

To Cigarette
Lighter Socket

Car Battery Adapter
SDC100

DC OUT
Jack