MINOLTA 2163-910 User Manual

Page of 65
123
APPENDIX
122
• If you have questions about your camera, contact your local camera
dealer or write to the Minolta distributor in your area.
• Before shipping your camera for repair, please contact an authorized
Minolta Service Facility for details.
Questions and Service
When storing your camera for extended periods,
• Always attach the protective caps.
• Store in a cool, dry, and well-ventilated area away from dust and
chemicals such as moth balls. For long periods, place the camera in
an airtight container with a silica gel drying agent.
• Periodically release the camera’s shutter to keep it operating properly.
• Before using after prolonged storage, check the camera’s operation to
make sure it is functioning properly.
Storage
• If the camera or lens barrel is dirty, wipe it gently with a soft, clean,
dry cloth If the camera or lens comes in contact with sand, gently blow
away loose particles - wiping may scratch the surface.
• To clean the lens surface, first brush away any dust or sand then, if
necessary, moisten a lens tissue with lens cleaning fluid and gently
wipe the lens in a circular motion, starting from the center.
• Never place lens fluid directly on the lens.
• Never touch the interior of the camera, especially the shutter and
mirror, doing so may impair their alignment and movement.
• Dust on the mirror will not affect the exposure but may affect the
focus. Use a blower brush to remove dust from or around the mirror.
• Never use compressed air to clean the camera’s interior, it may cause
damage to sensitive interior parts.
• Never use organic solvents to clean the camera.
• Never touch the lens surface with your fingers.
Cleaning
• Check the camera’s operation carefully, or take test photographs.
• Minolta is not responsible for any loss that may occur due to an
equipment malfunction.
Before Important Events
• This camera is designed for use from -20° to 50°C (4 to 122 °F).
• Never leave your camera where it may be subjected to extreme
temperatures such as in the glove compartment of a car.
• The data panel response time will be slow at cold temperatures. The
display will temporarily darken at high temperatures, but will be
restored when the temperature normalizes.
• This camera is not waterproof or splashproof. When using the camera
in the rain, protect the camera and lens.
• Never subject the camera to extreme humidity.
• To prevent condensation from forming, place the camera in a sealed
plastic bag when bringing it from cold environment to a warm
environment. Allow it to come to room temperature before removing it
from the bag.
• The low-battery symbol may appear even with fresh batteries
depending on the storage conditions. To restore camera power, repeat
turning the camera on and off.
• Battery capacity decreases at colder temperatures. Keep your camera
and spare batteries in a warm inside pocket when shooting in cold
weather. Batteries will regain some of their capacity when warmed to
normal operating temperature.
Operating Temperature and Conditions
CARE AND STRAGE
9222-2163-11 MM-B108 (E).qxd  01.8.3  16:11  Page 122