RCA CC4251 User Manual

Caution:  Insert
the cassette only
one way with the
tape wheel facing
up and the tape
windows facing
out.  The cassette
should slide easily
into the holder.
Gently push the
cassette down until
it locks into place.

• When you are finished with a cassette,

rewind it, remove it from the
camcorder, and label it.

• Store cassettes vertically in their

protective cases at normal room
temperatures.  Do not leave your
camcorder or cassettes in a car or
outdoors for an extended period.
Excessive heat or cold might damage
your cassettes.

• Keep the cassette away from strong

magnetic fields such as electric motors
and other devices.

• Keep dust from entering the cassette

compartment.  All dust is abrasive
and  causes excessive wear on the
tape and the camcorder’s recording
or playback heads.

• Do not use cassettes with damaged or

spliced tape.

• Do not use a cassette if it has been

damaged or exposed to moisture.  The
tape may jam and/or damage your
camcorder.

• Break off the safety tab to prevent

accidental erasure of your recording.

1. Attach a power source to the

camcorder.

2. Press the STOP/EJECT button.

The cassette holder opens
automatically.

3. Insert the cassette with the tape wheel

facing up and tape windows facing

STOP/
EJECT
Button

out. Gently push the cassette down
until it locks into place.

4. Gently close the cassette holder with

your hand.