RCA CC4251 User Manual

1. Attach a power source to the

camcorder.  Press and hold the small
button on the CAMERA/OFF/VCR
switch while you slide it to CAMERA.

2. Locate the place on the tape where

you want to record the title.

Note:  If you record a title on a
prerecorded tape, the audio and video is
erased where the title is inserted.  There
will also be a three-to-four second pause
of blank tape before the existing audio
and video return.

3. Press TITLER to display the titler

graphics in the viewfinder.

4. Press REC/PAUSE to start recording

the title.

5. After you have recorded the title for

the desired length of time, press

TITLER to remove the titler graphics
from the viewfinder.  The camcorder
now records normally.  If you do not
want to continue recording, press
REC/PAUSE.

Remember: Remove the titler
graphics from the viewfinder for
normal recording.

Note:  You can use the AUTO title feature
to automatically record the title and date
for ten seconds when you begin recording.
Press the DATE/TIME button to display

  TITLE before starting to record.

1. Attach a power source to the

camcorder.

2. Place the tape you want to copy in the

camcorder and place the CAMERA/
OFF/VCR switch in VCR.

3. Place a blank tape in the VCR, and

place the VCR in record-pause.

4. Start copying the tape from the

camcorder to the VCR.  Details are
on pages 36-37.

5. When you see the place on the

tape you want to insert the title,
press TITLER.

6. After you have recorded the title for

the desired time, press TITLER to
stop recording the title.

7. Stop the camcorder and VCR when

you finish copying the tape.

Important Note:  Remove the titler graphics
from the viewfinder for normal recording.