Panasonic HC-V750 User Manual

Page of 220
- 17 -
Inserting/removing an SD card
Caution:
Check that the access lamp has gone off.
1
Open the SD card cover and insert 
(remove) the SD card into (from) 
the card slot 
B.
≥ Face the label side C in the direction shown 
in the illustration and press it straight in as far 
as it will go.
≥ Press the center of the SD card and then pull 
it straight out.
2
Securely close the SD card cover.
≥ Securely close it until it clicks.
≥ Do not touch the terminals on the back of the 
SD card.
≥ Do not apply strong shocks, bend, or drop the 
SD card.
≥ Electrical noise, static electricity or the failure 
of this unit or the SD card may damage or 
erase the data stored on the SD card.
≥ When the card access lamp is lit, do not:
j Remove the SD card
j Turn the unit off
j Insert and remove the USB cable
j Expose the unit to vibrations or shock
Performing the above while the lamp is on 
may result in damage to data/SD card or this 
unit.
≥ Do not expose the terminals of the SD card to 
water, dirt or dust.
≥ Do not place SD cards in the following areas:
j In direct sunlight
j In very dusty or humid areas
j Near a heater
j Locations susceptible to significant 
difference in temperature (condensation 
can occur.)
j Where static electricity or electromagnetic 
waves occur
≥ To protect SD cards, return them to their 
cases when you are not using them.
≥ About disposing of or giving away the SD 
card. (
)
When using an SD card not from Panasonic, or one previously used on other equipment, for the 
first time on this unit, format the SD card. (
) When the SD card is formatted, all of the 
recorded data is deleted. Once the data is deleted, it cannot be restored.
Access lamp [ACCESS] A
≥ When this unit is accessing the SD card, 
the access lamp lights up.