Panasonic SDR-S10 User Manual
15
VQT1E14
Before using
To use a tripod (VW-CT45E; optional), the
tripod adaptor on the 2-way hand strap
(supplied) must be attached to this unit.
(Please carefully read the operating
instructions for how to attach the unit to
the tripod.)
tripod adaptor on the 2-way hand strap
(supplied) must be attached to this unit.
(Please carefully read the operating
instructions for how to attach the unit to
the tripod.)
1
Attach the 2-way hand strap and
the tripod adaptor to the unit.
the tripod adaptor to the unit.
2
Attach camera base 2 on the
tripod to the tripod receptacle
1 on the adaptor.
tripod to the tripod receptacle
1 on the adaptor.
To detach from the tripod
When detaching from the tripod, only the
unit may detach and the adaptor may not
detach. In this case, use the length
adjustment tab to turn the adaptor and
detach it from the tripod.
unit may detach and the adaptor may not
detach. In this case, use the length
adjustment tab to turn the adaptor and
detach it from the tripod.
≥ When the tripod is used, the card/battery
door cannot be opened. Insert an SD
card and the battery before attaching this
unit to the tripod. (l 19, 26)
card and the battery before attaching this
unit to the tripod. (l 19, 26)
You can record the image while viewing
it on the LCD monitor.
it on the LCD monitor.
1
Place your finger on the LCD
monitor open part A and pull
the LCD monitor out in the
direction of the arrow.
monitor open part A and pull
the LCD monitor out in the
direction of the arrow.
≥ It can open up to 90o.
2
Adjust the angle of the LCD
monitor as desired.
monitor as desired.
≥ It can rotate up to 90o A towards
the lens or 90o B towards the
opposite direction.
opposite direction.
≥ The brightness and colour level of the
LCD monitor can be adjusted from the
menu. (l 36)
menu. (l 36)
≥ The unit may be damaged or fail if the
LCD monitor is forcibly opened or rotated.
Attaching to a tripod
1
2
Using the LCD monitor
A
A
B
VQT1E14(EB_GC_ENG).book 15 ページ ２００７年２月２８日 水曜日 午後２時２３分